Search results

The purpose of this paper is to check the Solar Photovoltaic (PV) inverter working condition with modified unipolar switching pulse. The gate pulse for the inverter switches is generated in MATLAB simulation and interfaced with hardware protype. Simulation results can be compared with hardware results.

A considerable amount of research has been done on different Pulse Width Modulation (PWM) techniques. Based on the findings, a modified Unipolar Sinusoidal PWM technique was created with one reference signal and two carrier signals+ (one for the positive half cycle and the other for the negative half cycle) and simulated in the MATLAB/Simulink platform. The prototype inverter module receives the simulated switching pulses via dSPACE DS1104 hardware software interfacing board. The hardware implementation has been done, and the hardware results compared with simulation results for various input voltage levels using resistive load.

This modified switching pulse has dead band and additional hardware setup is not required. 3-phase multi-level inverter output waveform has been achieved with six switches in this method and with low filter values, pure sine wave output can be obtained in simulation. By this method of switching pulse generation and testing, for every modification in switching pulse hardware gate driver is not required. Resulting time consumption and money investment are lower.

Modified Unipolar SPWM pulse generation technique is novel method for solar PV inverter. The switching pulse has been designed and tested in both MATLAB/Simulation and hardware prototype inverter. Hardware and software results are identical. This method of pulse generation and hardware implementation has not been done anywhere before.

The purpose of this paper is to design and develop an instrument for non-destructive fabric grams per square metre (GSM) measurement. This study uses the capacitance principle to obtain the fabric GSM. The relative permittivity of the sample fabrics changes the capacitance value. A relationship between capacitance and GSM that best fits the look-up table is obtained. Also, the developed system is applicable for all kind of fabrics both knitted and woven fabrics. The comparison study was carried out with existing test method.

The purpose of the study is to design and develop an instrument for non-destructive fabric GSM measurement.

The proposed non-destructive method of fabric GSM measurement using capacitance principle is designed, developed and tested. Also, the developed system is applicable for all kind of fabrics both knitted and woven fabrics. The comparison study was carried out with existing test method.

The change in capacitance due to relative permittivity of the sample fabric is in pF range (10-12). The system can be further improved by using a capacitance sensor of sensitivity upto 1 fF (10-15). By doing so, the proposed system provides better results in terms of accuracy and resolution. The system developed can be further extended by making it online equipment which measures the fabric GSM instantaneously.

So far there is no non-destructive testing method available for fabric weight measurement. The newly designed and developed instrument is used to test the fabric both woven and knitted non-destructively.

In recent years, interdisciplinary studies have been the mainstream in research discourses and practices. Depending on the degree of integration, the combination of electronics and textiles can be divided into three categories: wearable electronics, textronics and fibertronics. This paper discusses the development of cotton-wrapped nichrome yarn, copper core conductive yarn and optical core conductive yarn in different diameters for the production of nichrome fabric, copper core conductive fabric, optical core conductive fabric and teleintimation fabric. The yarn and the fabric were tested by a test rig especially developed for this research work. This work provides a methodology of developing conductive yarn and fabric for the development of wearable electronic products in terms of user acceptability.

Silicon photovoltaics technology has drawbacks of high cost and power conversion efficiency. In order to extract the maximum output power of the module, maximum power point (MPP) is used by implying the nonlinear behavior of I-V characteristics. Different techniques are used regarding maximum power point tracking (MPPT). The paper aims to review the techniques of MPPT used in PV systems and review the comparison between Perturb and Observe (P&O) method and incremental conductance (IC) method that are used to track the maximum power and gives a comparative review of all those techniques.

A study of MPPT techniques for photovoltaic (PV) systems is presented. Matlab Simulink is used to find the MPP using P&O simulation along with IC simulation at a steady temperature and irradiance.

MATLAB simulations are used to implement the P&O method and IC method, which includes a PV cell connected to an MPPT-controlled boost converter. The simulation results demonstrate the accuracy of the PV model as well as the functional value of the algorithms, which has improved tracking efficiency and dynamic characteristics. P&O solution gave 94% performance when configured. P&O controller has a better time response process. As compared to the P&O method of tracking, the incremental conductance response rate was significantly slower.

In PV systems, MPPT techniques are used to optimize the PV array output power by continuously tracking the MPP under a variety of operating conditions, including cell temperature and irradiation level.

After reading the case, the students shall be able to explain the concept of insider trading and differentiate between illegal insider trading and legal insider trading, business ethics, financial institutions, financial markets and accounting; to interpret the legal framework for prevention of insider trading; to identify the role and significance of the market regulator, Securities and Exchange Board of India (SEBI), in detecting financial crimes such as insider trading; to demonstrate the association between information, stock trading and stock prices within the framework of efficient markets; and to appraise the ethical dilemma in a family-owned firm, where the family members of the promoter group are alleged to have indulged in a financial crime.

The case revolves around allegations of insider trading against the promoter and the promoter group of the family owned and controlled firm, Lux Industries Limited. On January 24, 2022, the SEBI, the regulator of securities markets in India, accused Udit Todi, the Executive Director of Lux Industries Limited, of engaging in insider trading through a chain of 14 connected parties. Udit Todi was also the son of the Managing Director, Pradip Kumar Todi, and the nephew of the Executive Chairman, Ashok Kumar Todi. In its interim order, SEBI alleged a breach of insider trading regulations by a group of 14 connected entities that had built up long positions starting from May 21, 2021, before the quarterly financial results (Q4) and the annual results of the financial year (FY) 2021 in the equity shares of Lux Industries Limited, with its registered office in Kolkata, India, were announced. Subsequently, they squared off the long positions to make a profit of ₹29.43m. To restore the confidence of the investors, the Executive Chairman, Ashok Kumar Todi, needed to review the matter expeditiously and impartially. Taking into consideration the family ties of the accused, it was not going to be an easy task, yet, it had to be done. The case highlights the role of the regulator, SEBI, in unearthing financial frauds such as insider trading in an emerging market such as India.

Postgraduate programs in management, Executive education programs.

Teaching notes are available for educators only.

CSS 1: Accounting and Finance

To study the impact, awareness and preparedness of COVID-19, a “pandemic” that has aroused the attention of the entire world because of rapid infection rates; among the targeted rural communities as basis to analyze their self-sustainability level.

A mixed methodology/approach combining critical literature review and questionnaire-based survey has been followed in two villages, covering a sample of 150 households located in Solan district of Himachal Pradesh, India. The parameters were selected to check awareness/preparedness regarding basic guidelines, immunity, requirements of essential facilities to deal with COVID-19 patients, the effect of lockdown on social and financial status, difficulties in education.

The villages have the potential to transform into Smart Villages or Smart Communities with the adaption of self-sustainable processes. The self-reliance on agriculture and traditional lifestyle in targeted rural areas make them relatively safer as compared to the urban areas. The community's overall awareness about COVID-19 and its preparedness was found satisfactory, with some variations that require more innovative strategies with academic interventions.

Although the scope of the study was limited to two remote villages of Himachal Pradesh (India), the results could be generalized for in-depth understanding about other villages in the state to convert them into smart villages.

It summarizes a systemic perspective based on selected parameters on how COVID-19 lockdown has affected different aspects of life in rural communities. Further, collaborative efforts and adoption of self-sustainability model can lead to the remarkable transformation of villages into smart villages.

This paper aims to study the effects of plum powder and apple pomace powder additions on the quality properties of buffalo meat emulsion.

Buffalo meat emulsions were prepared using different levels (2%, 4% and 6%) of plum powder and apple pomace powder, respectively. The meat emulsions were analysed for the physico-chemical, sensory and textural properties of the meat emulsion.

The pH of meat emulsions decreased significantly (p < 0.05) with an increased level of plum powder and apple pomace powder. Water-holding capacity (43.1%–48.1%), emulsion stability (80.2%–92.2%) and cooking yield (85.4%–91.0%) were significantly (p < 0.05) higher in plum powder and apple pomace powder added than the water-holding capacity (42.1%), emulsion stability (79.7%) and cooking yield (85.0%) of control emulsion. The moisture content was decreased significantly (p < 0.05), and crude fibre content was increased significantly (p < 0.05) with the increase in plum powder and apple pomace powder additions in meat emulsions. The total phenolic content and colour values (a* and b*) were significantly higher in plum powder and apple pomace powder added to meat emulsions. The sensory scores of meat emulsions were affected by the addition of plum powder and apple pomace powder. The meat emulsion added with 6% plum powder and 6% apple pomace powder showed significantly lower values of sensory overall acceptability. The hardness of meat emulsions increased with the addition of plum powder and apple pomace powder.

The results indicated that meat emulsions with a good cooking yield, fibre content, sensory acceptability and textural properties can be prepared by using plum powder and apple pomace powder.

The purpose of this study was to optimize meat slices for processing attributes to produce better sensory features in developed products from buffalo veal and chevon. The processing parameters such as meat particle size, fat content and binding ability without chopping were the subject of this study.

The study involved three experiments where the particle size, fat content and tumbling time were optimized for optimum binding and improvement in different sensory attributes of product followed by physico-chemical analysis.

The sensory scores clearly indicated that meat slices prepared from 3 mm meat particle size, 10% fat content and 1 h tumbling time were having best sensory features. The selected product was analyzed for different physico-chemical properties. Emulsion stability and cooking yield revealed significantly (p = 0.01) higher values of 91.6% and 89.7%, respectively, in buffalo veal than in values of 87.6% and 84.9%, respectively, in the chevon product. Similarly the results showed that buffalo veal slices had significantly (p = 0.01) higher (17.4%) protein than the chevon (15.2%), whereas chevon slices had significantly (p = 0.01) higher (10.3%) fat content. The texture profile analysis indicated that cohesiveness (p = 0.01) and chewiness (p = 0.05) were significantly higher in chevon product than in buffalo veal.

The study was conducted to explore the buffalo veal as a potential source of quality meat, as majority of buffalo meat produced in India from spent animals have compromised quality attributes. The comparison was done with chevon, the most popular red meat in the country for the comparative study.

This study aims at examining the factors governing business benefits of moving to Enterprise 2.0. Web 2.0 has been around for more than a decade, and has been exploited by a lot of business organizations for improving their operations and profitability. However, the success rate has not been uniform.

Is there a pattern behind this successful adoption has been a matter of curiosity for most top management personnel. This paper goes into analyzing what factors govern this movement from Enterprise 1.0 to Enterprise 2.0 and uses structured equation modeling to predict the possibilities.

It concludes by demonstrating that business benefits to the organization are significantly linked to the usage of Web 2.0 tools.

The paper has been done in India, and the authors expect that similar studies around the world will result in similar results.

Results of this paper emphasize the strong correlation between the use of Web 1.0 and Web 2.0 tools with business benefits obtained in terms of improved productivity of resources used and a higher level of information quality leading to better decision-making. Thus, transition to the Enterprise 2.0 state should be strived by all business organizations.

This is an original work of the authors.